|Project by neverenougftackle||posted 05-24-2014 12:22 AM||2253 views||2 times favorited||4 comments|
This is the second set of plans I have bought from this engineer, he makes very sure you understand his ideas and just how to make them, with MANY sets of different plans from all angles. He is VERY good.
This picture I located in my computer. It is a measured line marked base board, I came up with to help to lock in place the piece that’s being inscribed. The piece being inscribed, sets up above the adjustable wood bar and locking knobs. and below the perminent wood bar. Wedged in place, and to help keep from slipping, by placing the sanding belt/s between the two bars and sign.
I am a little ahead of my self by placing the sign board that is there now in this picture. It first has to go over to the pin router in order to inscribe the perimeter grove, then back here, to be inscribed with a decorative figure on ether side of the name.
Those white matting are the non slip shelf matting I cut into pieces for all kinds of non slip woodworking. In place here, below the sign as another, holding in place for the panograph making inscriptions. there is another machine I made and will post later, that does this and more. Kind’ah a poor mans CNC, although no where as acurate.