|Project by abie||posted 05-23-2014 01:29 AM||1855 views||0 times favorited||2 comments|
Built a Grease box like Viktor’s.
Built a jig to attach to the router table
Built side boards to hold jig square to the table
Pin in the jig is a 4/20 insert where bolt may hold the boards as they are swung thru the dovetail bit.
I made the first board and then matched the dovetails to the first identicall board.
Next I shall post the finished grease box.
TNX Viktor for the inspiration.
Viktors box in fourth picture….
-- Bruce. a mind is like a book it is only useful when open.