LumberJocks

Another end grain cutting board.

  • Advertise with us
Project by Philzoel posted 106 days ago 1304 views 8 times favorited 13 comments Add to Favorites Watch

This is similar design as previous but use hard maple, Purple Heart and birch plywood.

-- Phil Zoeller louisville, KY





13 comments so far

View jaykaypur's profile

jaykaypur

3316 posts in 1041 days


#1 posted 106 days ago

Now THAT is a masterpiece. Love this one.

-- Use it up, Wear it out --------------- Make it do, Or do without!

View degoose's profile

degoose

6996 posts in 1987 days


#2 posted 105 days ago

Extra nice…

-- Drink twice... and don't bother to cut... @ lazylarrywoodworks.com.au For lovers of all things timber...

View Ken90712's profile

Ken90712

14878 posts in 1821 days


#3 posted 105 days ago

Very cool. I have a buddy that loves the look of plywood Endgrain. Might have to do this thx for sharing…

-- Ken, "Everyday above ground is a good day!"

View deon's profile

deon

2171 posts in 1658 days


#4 posted 105 days ago

Great work!

-- Dreaming patterns

View nonickswood's profile

nonickswood

390 posts in 1020 days


#5 posted 105 days ago

Very Nice!! Beautiful Board.

-- Nick, Virginia, http://www.etsy.com/shop/NONICKSWOOD

View aussiedave's profile

aussiedave

3014 posts in 457 days


#6 posted 105 days ago

Great looking cutting board…well made.

-- Dave.......Keep calm and make more sawdust....

View beefererer's profile

beefererer

30 posts in 918 days


#7 posted 105 days ago

I wouldn’t cut anything on it- I would hang it on a wall!

-- "Don't you hate it when people don't finish what they"

View sawdustjunkie's profile

sawdustjunkie

147 posts in 350 days


#8 posted 105 days ago

I would really like to know how you built those. I have been wanting to make an end grain board for awhile now.
The design is striking?
Well done

If you could please let us know how you did this design!

-- Steve: Franklin, WI

View Philzoel's profile

Philzoel

274 posts in 976 days


#9 posted 105 days ago

I have a blog on making falling block end grain cutting board. This type is very difficult and not a starter one. There are many others here and on toy tube. I learned from them.

-- Phil Zoeller louisville, KY

View joemick's profile

joemick

13 posts in 2011 days


#10 posted 105 days ago

Looks Great!!!!!
I wouldn’t cut anything that I plan to eat on it though.
That glue in the plywood can’t be edible.

Joemick Newtown, PA

-- Joemick

View Andy Ponder's profile

Andy Ponder

106 posts in 340 days


#11 posted 105 days ago

Very nice board. I would like to see it done.

Andy

-- AP--Unless you're the lead dog, the view never changes.

View Philzoel's profile

Philzoel

274 posts in 976 days


#12 posted 105 days ago

Hay Joe the table you eat on etc uses glue. Glue does not leach or go soft. It is harder than the wood.

I would not worry about it. I tested plywood under water for 3 days and it did not soften. Ply’s pulled apart but glue was intake.

-- Phil Zoeller louisville, KY

View Roger's profile

Roger

14373 posts in 1437 days


#13 posted 98 days ago

I personally like this one better than the stained one.

-- Roger from KY. Work/Play/Travel Safe. Kentuk55@bellsouth.net

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase