Rollable shop cabinet

  • Advertise with us
Project by acraig5075 posted 05-12-2014 01:30 AM 1037 views 0 times favorited 2 comments Add to Favorites Watch

There are many cabinets like it, but this one is mine! I made it to fit a modular store-bought wire drawer system that was lying around gathering dust. It’s to store general garage paraphernalia, but also to be another work surface and made to a height for table saw out-feed support. It’s solid and heavy, has a pine frame with pocket hole screw construction, and 6mm plywood panels set into grooves in the frame. The top is veneered blockboard with solid wood edging and front and rear overhangs to accommodate clamping. I finished it with 3 coats brushed-on poly to keep it clean and provide protection against the knocks it will receive.

2 comments so far

View aussiedave's profile


3090 posts in 858 days

#1 posted 05-12-2014 10:54 AM

Very nice shop cabinet and lots of storage inside…well done.

-- Dave.......Keep calm and make more sawdust....

View whitebeast88's profile


3947 posts in 1224 days

#2 posted 05-12-2014 10:27 PM

nice cabinet,love the wire baskets.

welcome to lumberjocks!!!

-- Marty.Athens,AL

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics