or Join Now!
A fun little project. Plywood, walnut frame, oak dowels, green felt, gloss poly, wax. These will go to the winners of our corn hole game at this years reunion in July. Thanks for looking.
May 10, 2014
home | projects | blog
113 posts in 1874 days
Preview this project card
table top shuffleboard
11650 posts in 1561 days
#1 posted 05-10-2014 01:36 PM
I Love These! Favorited, very cool! Where’d you get the bearing / game pieces?
-- Don't anthropomorphize your handplanes. They hate it when you do that. -- OldTools Archive
#2 posted 05-10-2014 01:41 PM
Smitty .. pucks can be purchased from Amazon. Do a search for tabletop shuffleboard pucks. Thanks.
165 posts in 1090 days
#3 posted 05-10-2014 01:57 PM
These are awesome. A blast from the past.. I had one of these when I was a lad.. The great toys always seem to resurface.. The puck storage is quite ingenious, I can remember having to store the pucks in a plastic bag. Thanks so much for sharing.
-- Jeff, Ability will never catch up with the demand for it. - Malcolm Forbes
#4 posted 05-10-2014 01:58 PM
This is on my to-do list. Off to buy pucks so they’re ready when I am…
22 posts in 540 days
#5 posted 05-10-2014 02:13 PM
Awesome. My buddy has the straight version and it’s a blast – it’s our cornhole in the wintertime. I need to make one of these, thanks for the inspiration.
53 posts in 752 days
#6 posted 05-10-2014 02:56 PM
This is great, I’m gonna have to make one for our reunion too! Thanks for sharing!
17762 posts in 1810 days
#7 posted 05-10-2014 02:59 PM
This is a wonderful recreational table and you’ve done a fine job on it. I’ll bet you had a lot of fun doing it.
helluvawreck aka Charleshttp://woodworkingexpo.wordpress.com
-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau
4229 posts in 1093 days
#8 posted 05-10-2014 04:50 PM
I’ve never seen the banked version like this. Only the 16 ft long ones in bars. How long did you make it, 8ft? Looks like you used 1 sheet of ply for the dimensions of both?
-- The quality of one's woodworking is directly related to the amount of flannel worn.
#9 posted 05-10-2014 05:40 PM
Each game is 48” long x 18” wide. Frame and center divider is 3/4” thick material. Plywood bottom is 3/4”. Plywood top is 1/8”. Dowels are 3/8”. Rubber bands are 1/2” wide. Pucks can be purchased online, do a search for tabletop shuffleboard pucks. the ‘bank’ angle is 90 degrees. The score zone dividers/foul line are 1/8” x1/8” inlaid walnut. Numbers/lettering is stenciled and pen painted. Hope this helps you all.
47 posts in 1300 days
#10 posted 05-10-2014 11:10 PM
I have always loved playing this shuffleboard game. And now you created a perfect home version of it. Awesome job!
-- Mr Tall
487 posts in 1216 days
#11 posted 05-11-2014 01:52 AM
Awww man! I remember that game as a kid. But mine was all plastic with rubber bands at the top. Your’s is much nicer.
-- Just a man with his chisel.........
1993 posts in 2970 days
#12 posted 05-11-2014 02:51 AM
This is really nice. Thanks!
-- jack -- ...measure once, curse twice!
5310 posts in 1323 days
#13 posted 05-11-2014 03:28 AM
Ah man, I wish my family were more into games, I’d build one of these in a heartbeat. Nicely done.
298 posts in 2256 days
#14 posted 05-11-2014 02:52 PM
Great job! That’s the kind of prize that will be prized for a long time to come. : )
-- The greatest danger for most of us is not that our aim is too high and we miss it, but that our aim is too low and we reach it.. Michelangelo
42 posts in 600 days
#15 posted 05-14-2014 11:32 AM
This is Awesome!
View all comments »
showing 1 through 15 of 16 comments
Go to Pulse page »
©2015 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics