LumberJocks

Endgrain cutting board

  • Advertise with us
Project by Chris28meyers posted 05-05-2014 01:30 PM 553 views 0 times favorited 2 comments Add to Favorites Watch
Endgrain cutting board
Endgrain cutting board No picture No picture No picture No picture No picture
Zoom Pictures

I used various types of wood for my cutting board. I used some hard and some soft. I used cherry, pine, some cedar, just a bunch of different pieces. I took those long strips and cut them down to 20 inch pieces. I then took those pieces and glued and clamped them together. After they dried I cut them into strips for my final glue. Once it was glued up I sanded both sides and rounded the top edges. For finish I just used some poly because I was just going for looks not use. Since I had soft and hard wood it wouldn’t make a good useful cutting board but rather like a decoration or something.





2 comments so far

View Ken90712's profile

Ken90712

16951 posts in 2649 days


#1 posted 05-05-2014 01:54 PM

Great looking board… well done…

-- Ken, "Everyday above ground is a good day!"

View Rick's profile

Rick

8287 posts in 2493 days


#2 posted 05-06-2014 04:41 AM

*

-- Hope Everyone Is Doing Well! .... Best Regards: Rick

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com