LumberJocks

Table and stools

  • Advertise with us
Project by nlartist posted 04-28-2014 12:43 AM 900 views 2 times favorited 9 comments Add to Favorites Watch
Table and stools
Table and stools No picture No picture No picture No picture No picture
Zoom Pictures

Oak and maple table, oak stools. Stained in red mahogany and finished with polyurethane.





9 comments so far

View Lee Leitner's profile

Lee Leitner

45 posts in 1140 days


#1 posted 04-28-2014 01:21 AM

very nice design. I like to chairs departure from norm.

-- Lee

View outsidethebox's profile

outsidethebox

27 posts in 1339 days


#2 posted 04-28-2014 01:26 AM

I really like it. Simple, functional, awesome…great work!

-- Corey, Renville, MN

View a1Jim's profile

a1Jim

115206 posts in 3044 days


#3 posted 04-28-2014 02:24 AM

Great job.

-- http://artisticwoodstudio.com Custom furniture

View nlartist's profile

nlartist

34 posts in 966 days


#4 posted 04-28-2014 09:08 AM

Thanks for the nice comments

View Kaleb the Swede's profile

Kaleb the Swede

1732 posts in 1437 days


#5 posted 04-28-2014 11:34 AM

I like the way you finished it; it looks very classy. Great design too

-- Just trying to build something beautiful

View Monte Pittman's profile

Monte Pittman

22047 posts in 1805 days


#6 posted 04-28-2014 12:14 PM

Nice looking work.

Welcome to Lumberjocks

-- Mother Nature created it, I just assemble it.

View kaerlighedsbamsen's profile

kaerlighedsbamsen

1177 posts in 1181 days


#7 posted 04-28-2014 06:40 PM

Looks great!

-- "Do or Do not. There is no try." - Yoda

View B's profile

B

137 posts in 955 days


#8 posted 05-01-2014 03:41 PM

Very interesting and nicely done, this had me thinking for a long time.There are no aprons, what kind of joinery did you use?

-- A poor workman blames his tools. Mr.B, Ontario Canada - https://www.instagram.com/boysbeit/

View nlartist's profile

nlartist

34 posts in 966 days


#9 posted 05-01-2014 04:54 PM

I turned a disk out of solid oak about 12 inches in diameter and bored it in the centre the same size as the spindle, then I glued under the top in the centre. The spindle was glued in the disk. The legs are two solid pieces of maple notched in the centre. I used a table saw to cut the notches in the bottom of the spindle the same size as the legs.
I finished the notches on the spindle with a nice sharp chisel.

The top was cut out of a piece of oak glued together that was given to me.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com