LumberJocks

Golf Balls and Tees as USA Flag

  • Advertise with us
Project by MrTall posted 04-26-2014 03:22 PM 28442 views 4 times favorited 9 comments Add to Favorites Watch

Trying to remember where I saw this originally since I made this 10+ years ago.

These are golf balls, not ping pong balls. Bought used ones from eBay and painted them by drilling a hole into the bottom of each ball, then making a jig with dowels that held ball so i could spray paint them.

This must weight 30+ pounds.

Enjoy,
Mr. Tall

-- Mr Tall





9 comments so far

View a1Jim's profile

a1Jim

117328 posts in 3777 days


#1 posted 04-26-2014 04:22 PM

Very cool idea.

-- https://www.artisticwoodstudio.com/videos wood crafting & woodworking classes

View JoeinGa's profile

JoeinGa

7739 posts in 2206 days


#2 posted 04-26-2014 11:02 PM

Cool idea … I see a few T’s missing :-)

-- Perform A Random Act Of Kindness Today ... Pay It Forward

View MShort's profile

MShort

1797 posts in 3618 days


#3 posted 04-26-2014 11:30 PM

Really neat idea.

-- Mike, Missouri --- “A positive life can not happen with a negative mind.” ---

View BikerDad's profile

BikerDad

347 posts in 3801 days


#4 posted 04-27-2014 03:52 AM

Finally, something good to come out of golf!!! ‘Tis a wonderful idea. Have you had any problems with the paint flaking/peeling off in the last decade?

-- I'm happier than a tornado in a trailer park! Grace & Peace.

View MrTall's profile

MrTall

79 posts in 2557 days


#5 posted 04-27-2014 07:04 PM

Thank you for the nice comments. Yes…it needs a little TLC. It was hanging outside under a covered patio for 10 years and now is in my man cave basement. I spray painted the golf balls and NO peeling or any issues.

-- Mr Tall

View ohwoodeye's profile

ohwoodeye

2104 posts in 3353 days


#6 posted 04-28-2014 07:53 PM

I love the idea. How are the balls attached to the plywood?........I am assuming there is a 3/4” plywood square under everthing.

-- Directions are just the Manufacturer's "opinion" on how something should be assembled. ----Mike, Waukesha, WI

View MrTall's profile

MrTall

79 posts in 2557 days


#7 posted 05-08-2014 01:26 AM

I spray painted the golf balls and no peeling at all…

The golf balls are glued with silicone caulk and yes there is a 1/2” or 5/8” plywood on the back

-- Mr Tall

View LisLotti's profile

LisLotti

1 post in 391 days


#8 posted 11-17-2017 02:37 AM

How did you attach the tees?

View MrTall's profile

MrTall

79 posts in 2557 days


#9 posted 11-17-2017 01:13 PM

drilled a hole into the top at the same diameter of the tee. Then glued in

-- Mr Tall

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com