|Project by MJCD||posted 04-21-2014 09:22 PM||675 views||1 time favorited||2 comments|
I’m posting this for the benefit of LJ members who may want to copy the design – the project specifications are available to anyone interested.
The DVD Holder is primarily Hard Maple, with Sapele accent strips (centered along the exposed edge). 67”h x 12.5”w and 7” deep. The bottom (10.5”d) extends 3.5” forward of the 7” deep Top.
The project consists of an isolated three-panel storage area; separated from the top and bottom by exposed tenons (Sapele) – these were created with 6mm and 4mm Domino tenons – self-made.
While I did endeavor for this to be a commercial-grade project, I became over-anxious with the finish (Waterlox Original), and it created drip marks which I caught too-late in the build to adequately fix.
The three panels are continuous arcs, 3/4” inset along a 65” arc.
I’ll provide more commentary as members wish.
-- Lead By Example; Make a Difference