LumberJocks

poospleasures's Blog

  • Advertise with us
This blog is written by poospleasures | 26 entries so far

Latest Entry

Making all wood folding knives #5: Final Assembly and Finish

05-01-2016 10:50 PM by poospleasures | 4 comments »

Hello again,We will be putting together assembly’s that we have been working on to come up with a whole folding all wood pocket knife. Get your finished and sanded blades and rub some candle wax on all the areas around the pin holes. Now take your recently finished knife body and place the blades in it. Use the nail to again pin those parts together. Make sure they operate to your satisfaction. You will need a thin metal spacer (my spacer is 0.017 thick) to keep the moving parts from being to tight after you tap the pin with a light hammer to flatten the ends. Put the spacer as shown and pull out the nail and push in the copper pin. Then clip the protruding ends. Sand the ends flush...

Read this entry »

Older Entries

View all 26 entries »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com