|Workshop by piper||posted 07-05-2007 04:06 AM||3011 reads||8 times favorited||17 comments|
click the marker to see the address
My workshop is a one car garage about 10’ X 20’. My wonderful wife has allowed me to have this space dedicated totally to my hobby. I only have to share my space with the dog. I insulated the walls and covered one with peg board then covered the ceiling and two walls with 4” beadboard siding. I decided to tile the floors, then covered them with three coats of epoxy floor coating. This makes it very easy to keep clean. The cabinets are oak face frames and plywood. The tops are two layers of 3/4” plywood with a masonite top. The masonite can be replaced easily for less than $20 so I dont have to be careful when working. I tend to get in a hurry sometimes. The center cabinet is built low enough so that all of my bench tools can be shimmed to use the cabinets as an in-feed and out-feed table. It has taken me a year to get this far but has been a lot of fun.