LumberJocks

pintodeluxe's Blog

  • Advertise with us
This blog is written by pintodeluxe | 83 entries so far

Latest Entry

Dewalt 735 Mods and Repairs #2: Shelix Head Installation

12-26-2014 01:26 AM by pintodeluxe | 8 comments »

I installed the Shelix cutterhead from Holbren in my Dewalt 735. Although Holbren has online instructions, I found Chris Wong’s video, of Flair Woodworks, to be more detailed. The process was surprisingly simple, and went together without a hitch. I won’t recount the entire installation process, because it is well covered elsewhere, however I will add a couple tips if you are considering this upgrade. When you pull the gearbox off to access the cutterhead, use a bungee cord to hold it in place. It can rotate 90 degrees and it stays out of the way during installation. The other thing I did was use blue (removable) Loctite when reassembling the planer. The helical gea...

Read this entry »

Older Entries

View all 83 entries »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase