LumberJocks

Jewllery chest #2: Development + sketchup

  • Advertise with us
Blog entry by paulcoyne posted 1708 days ago 745 reads 0 times favorited 1 comment Add to Favorites Watch
« Part 1: The plan so far Part 2 of Jewllery chest series no next part

Well plenty of time has passed since i started this project idea, and in that time i worked hard on visualising the design i had and putting pencil to paper and working out dimensions of all the parts construction and joints my head was busy with all the details of the project. the overall size shall be 310mm high 510mm wide and 300mm deep, with 3 drawers approx 60mm high the handels shall be a curve across the front in walnut which shalll be resesed into the drawer fronts, after the sketches were done on paper i decided to try sketchup i have never drawn much more than a few cubes on this but stuck at it and watched a couple of videos this is what i came up with i am very impressed with sketchup.

tomorrow i start cuting all the bits and bobs hopefully it all runs smothly.
thanks for reading Paul

-- thats not a mistake... i ment that



1 comment so far

View kshipp's profile

kshipp

179 posts in 2402 days


#1 posted 1708 days ago

This looks like a very cool design. I especially like the curved handles across the front.

-- Kyle Shipp, http://battleshipp.blogspot.com

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase