LumberJocks

tutorial #3: horizontal curve top box

  • Advertise with us
Blog entry by patron posted 652 days ago 3653 reads 5 times favorited 22 comments Add to Favorites Watch
« Part 2: wavy wood build in small scale Part 3 of tutorial series Part 4: framing tips for shop and house wall builds »

for this box here

for dark woods
tape the edge
to see the pencil line

bandsaw on one side
then parallel that on the other
(just one side for the bottom)

router a rabbet
on the inside edges
(i used a 1/4” set back bit)

top and bottom
ready for the sides

the sides in place
and a rabbet to glue to

the ends were rabbeted into the front and back
and their tops beveled to match
the sides first cut shorter
and the rabbet cut down
so it flows with the front and back curve
for a design overhang there

that’s about it
any questions just ask

thank you all

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle



22 comments so far

View Joe Lyddon's profile

Joe Lyddon

7689 posts in 2689 days


#1 posted 652 days ago

Thank you very much!

Quite a process…

COOL…

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: http://www.WoodworkStuff.net ... My Small Gallery: http://www.ncwoodworker.net/pp/showgallery.php?ppuser=1389&cat=500"

View patron's profile

patron

13021 posts in 1978 days


#2 posted 652 days ago

happy to oblige joe

enjoy

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View eddie's profile

eddie

7286 posts in 1251 days


#3 posted 652 days ago

you are a cleaver one ,thanks David as Joe said quite a process

-- Jesus Is Alright with me

View patron's profile

patron

13021 posts in 1978 days


#4 posted 652 days ago

the hip bone is connected to the elbow somehow

we just have to figure out how
to get it thru our heads

mistakes do allot of that
and perseverance

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View Bob Kollman's profile

Bob Kollman

1796 posts in 1828 days


#5 posted 652 days ago

Nice work david…the design has an eastern look to it.

-- Bob Kenosha Wi.

View patron's profile

patron

13021 posts in 1978 days


#6 posted 652 days ago

that was my thought too bob
like pagoda roof look

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View Dave's profile

Dave

11160 posts in 1477 days


#7 posted 652 days ago

David I love it when you tell all your secrets.

-- Superdav "No matter where you go - there you are." http://chiselandforge.com

View patron's profile

patron

13021 posts in 1978 days


#8 posted 652 days ago

sure beats writing it all down dave
you notice some newbies
don’t understand
the woodworking lingo yet

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View gfadvm's profile

gfadvm

10760 posts in 1327 days


#9 posted 652 days ago

Again you made it look a LOT easier than it really is (at least for amateurs like me). I think you and Martyn have the same ‘out there’ design gene.

-- " I'll try to be nicer, if you'll try to be smarter" gfadvm

View patron's profile

patron

13021 posts in 1978 days


#10 posted 652 days ago

ah .... the good old days

when getting out of the genes
meant something

now it means
getting out the eyeglasses
to see whats going on

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View Sheila Landry (scrollgirl)'s profile

Sheila Landry (scrollgirl)

7600 posts in 1557 days


#11 posted 651 days ago

This is truly outstanding! And what a beautiful result! I love seeing this come together David! Thanks so much for taking the time to share with us. :)

Sheila

-- Designer/Artist/Teacher. Owner of Sheila Landry Designs (http://www.sheilalandrydesigns.com) Scroll saw, wood working and painting patterns and surfaces. "Knowledge is Power"

View sedcokid's profile

sedcokid

2672 posts in 2235 days


#12 posted 651 days ago

Thanks David for showing us how you created this beautiful box! I look forward to trying this on one of my projects soon!

-- Chuck Emery, Michigan,

View BritBoxmaker's profile

BritBoxmaker

4359 posts in 1673 days


#13 posted 651 days ago

You’ve found the perfect wave, nicely done, David.

-- Martyn -- Boxologist, Pattern Juggler and Candyman of the visually challenging. http://www.theartofboxes.com

View KOVA's profile

KOVA

1311 posts in 1015 days


#14 posted 650 days ago

TE PASASTE A LAS CURVAS DE LAS OLAS CON TOTAL ÉXITO!!!!!!
RRRRRRRRRRRRRRREEEECONNTRRRRRRRRRRRAMAESTRAAAAAAAAZZZZOOOOOOOOOOO

-- KOVA, EL CARPINTERO DEL PUEBLO https://www.facebook.com/pages/El-Carpintero-Del-Pueblo/148976618479733

View Roger Clark aka Rex's profile

Roger Clark aka Rex

6940 posts in 2071 days


#15 posted 650 days ago

You da man

-- Roger-R, Republic of Texas. "Always look on the Bright Side of Life" - An eyeball to eyeball confrontation with a blind person is as complete waste of Time.

showing 1 through 15 of 22 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase