LumberJocks

owenusa's Favorites

  • Advertise with us
View lanwater's profile

Cube in a Cube cutting board

06-06-2011 07:07 AM by lanwater | 7 comments »

I am greatfull to Steve (spalm) for sharing his building techniques for this board. He blogged about this board here: http://lumberjocks.com/SPalm/blog/23574 His project is here: http://lumberjocks.com/projects/49529#comment-993768 For detail step by step, please refer to Steve’s blog. I cut the pieces today. I used maple, walnut and cherry. Not the best contrasting wood but that’s all I had.I did cut twice as much as I needded. Try to get your pieces from the sam...

Read this entry »


View ganders's profile

The quick and dirty instructions on how to make a zig-zag pattern cutting board.

08-06-2008 12:26 PM by ganders | 24 comments »

The quick and dirty instructions on how to make a zig-zag pattern cutting board. Click on the pictures to see a full size image. Choose a couple different types of hardwood. The more colors the better. Below is cherry, maple and walnut. Rip strips of wood any width so the total with is about 12”. This is the width that will fit through my planer. The beauty of this is that none of the widths have to be the same. The board shown below is made of scrape wood. If you only have shor...

Read this entry »


View BritBoxmaker's profile

Snakes Pattern in Solid Wood #1: The Challenge of the Snakes

05-30-2010 08:24 PM by BritBoxmaker | 19 comments »

After posting the ‘Pattern of Four’ aka ‘Snakes’ box it occurred to me that it must be able to be done in solid wood, not just veneer. Another challenge methinks. Heres the pattern I think this can be reduced to its simplest components. Two types of square; one made up of four triangles and the other a simple square with sides half the length of the first. Each individual snake pattern is made up of four triangles and one square. Trust me I’ve seen the patterns ...

Read this entry »


View Tony's profile

Lattice Cutting board Help

09-11-2007 03:45 PM by Tony | 26 comments »

Update: 7 september 2010. As I do not have a lot of spare time for woodworking at the moment, I am submitting this blog for the contest, I hope you guys don’t mind that it is a little old Here is a link to the final projects- http://lumberjocks.com/projects/2542http://lumberjocks.com/projects/2559 http://lumberjocks.com/assets/pictures/projects/9436-438x.jpg?1233630507 After several e-mails requesting the plans for the Dan Walters cutting board I copied I decided to put some...

Read this entry »


View degoose's profile

How to make just one more board?

04-30-2009 12:57 PM by degoose | 29 comments »

To start I make a full size drawing of the board to see how it will look.Make an endgrain blank in dark timberMake an endgrain blank in light timberGlue and clamp.Plane or sand flat and level.Join both blanks with double sided tape and mark out the curves and cut on the banksawDetach from tape and alternate light and dark.. insert a string of PH and SA glue and clamp.Plane or sand flat and level and repeat the marking cutting , alternating the cut parts,stringing and glueing and clamping.As y...

Read this entry »


View poroskywood's profile

Drunken Cutting Boards #1: Drunken Alice in Wonderland Cutting Board

09-10-2009 03:22 AM by poroskywood | 41 comments »

Hey everybody, after a few personal messages here is my version of a how to on a Drunken Checker Board. I of coarse bow to the Chairman of the Board and pay tribute with beer. This is a Off-Checker pattern I call “Drunken Alice in Wonderland” The “serendipitous” nature of this piece is appealing in a far out sort of way. Here Goes… So first I prepare the Material. I am using Hard Maple and Walnut both are surfaced flat and cut 1” x 9” x 14&...

Read this entry »


View dewoodwork's profile

Beautiful end grain cutting boards free project plan

11-25-2007 07:31 AM by dewoodwork | 94 comments »

Construct these beautiful end grainCutting boards Hello fellow woodworkers,In the spirit of sharing woodworking knowledge I am writing this tutorial for anyone interested in constructing these beautiful end grain cutting boards. Take a look at the photos of the four styles I have made, or create your own pattern’s and follow the steps I have outlined in this tutorial. Questions and comments are welcome, enjoy. For this board I used maple, walnut, lyptus and purpleheart. White oak, wa...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase