LumberJocks

oldnovice's Blog

  • Advertise with us
This blog is written by oldnovice | 8 entries so far

Latest Entry

I decided to cut some grass!

11-06-2018 11:18 PM by oldnovice | 9 comments »

This did qualify as a wood project because it is bamboo flooring and bamboo is not wood, it’s a grassI cut this out of left over flooring that Fernando, a head nurse, gave me to play with and, as I really didn’t have any play time I made this for him. It didn’t cut too bad but not nearly as clean as wood!The finish on the very too layer is extremely thin and it was difficult to not have any chip out. The lettering and border were cut with an Onsrud 1/8” tapered (77-102) ball end mill while the cutout was done with an Onsrud down cut bit (57-910) for 1/16” to minimize the chipping of the top layer and finished cutout with an Onsrud Super “O”...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com