LumberJocks

my weekend workshop

  • Advertise with us
Blog series by noweyrey1 updated 04-21-2012 01:57 AM 2 parts 3895 reads 10 comments total

Part 1: tuning the table saw. Ridgid 4511

06-15-2011 03:00 AM by noweyrey1 | 7 comments »

Today I finally got around to making a zero clearance insert for my Ridgid R4511 Table saw. I’ve had the saw since November, but have not had much time to use it yet. I build an auxilary fence for it a couple weeks ago, which has helped a bit. I ordered some phenolic sheets on Ebay and finally they arrived today so I could make the insert. I had purchased the insert kit from Rockler previously, but its to short for my saws throat plate opening.Attached is some pictures of the insert fro...

Read this entry »


Part 2: Miter Saw dust shroud

04-21-2012 01:57 AM by noweyrey1 | 3 comments »

Today was more of an experiment than anything but I’m satisfied with how it turned out. I was tired of sawdust going everywhere in my garage when I used my miter saw, so decided to try build a shroud out of some scraps and some vinyl sheeting so the dust collector could be more effective. I have a shop vac under the miter saw that collects the dust from the saws port which doesn’t collect much at all. Eventually I’ll build a more permanent cabinet with a downdraft table unde...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase