LumberJocks

nonickswood's Favorites

  • Advertise with us
View degoose's profile

How to make a endgrain tumbling block butcher block board!

08-12-2009 12:13 PM by degoose | 48 comments »

Hi guys ,, I had a request to make a tutorial with regards the endgrain Tumbling Block Design.First off,.., You need to decide the size of the blocks…. for this example I used 1” stock… Or something similar.. actually just over .. once dressed. Set the blade of the table saw to 60 degrees.. a bevel box makes this simpleI use the INCRA fence system so it is easy to rip bevels off side of the blade.Once the bevels are ripped measure the length of the bevel and move the f...

Read this entry »


View poroskywood's profile

Drunken Cutting Boards #2: Smooth Flowing Drunken Checker board

09-21-2009 03:49 AM by poroskywood | 15 comments »

So having read part #1 I’ll complete the second variation of the Drunken checker board pattern. The process is basically the same except for one critical part and is as follows. Start again by taping two blanks together. This time In stead of making opposing S cuts I’ll follow the S pattern with each cut. (I get a little sloppy, but it works out OK). Follow the Part #1 procedure. CRITICAL PART! This step creates the difference between the pattern in part one ...

Read this entry »


View patron's profile

wedding box build - tutorial

06-12-2012 07:48 PM by patron | 25 comments »

i recently built a box for rivergirlto be given as a wedding present http://lumberjocks.com/projects/67292 as i had recently done a tutorialabout some design and cutting techniques http://lumberjocks.com/patron/blog/29227 that was fresh in my head and i used it for this box to make things easierrather than cut each part separatei started with some 5/4 black walnut and maple stock and double taped them together on edge and them cross cut them into blocks(no real size just...

Read this entry »


View mpounders's profile

"Carving a Tree Spirit" #1: Face and Nose

12-24-2011 10:49 PM by mpounders | 8 comments »

I took up carving because I was so impressed with a wood spirit I saw at a craft show, and I still work on them, even though other subjects have caught my attentions. Tree spirits and greenmen have been part of folklore and traditions through many ages and cultures. I have carved them as wall hangings, spoons, canes, and free standing pieces out of primarily found wood of different species. This tutorial will start with a small piece suitable for a cane or staff, but the techniques apply to a...

Read this entry »


View mpounders's profile

"Carving a Tree Spirit" #2: Beard and Eyes

12-27-2011 05:28 AM by mpounders | 6 comments »

We left off with the mustache and lip sketched in. I use the knife to outline the mustache with a straight-up stop cut and then make angled cuts up to that cut, so that the mustache is higher than the beard. Then use the knife to round over the edges of the mustache. Draw the lower lip in again and then cut out a c-shaped section underneath. Make a deep shallow cut between the mustache and upper part of the lip. A shallow cut makes the mouth look slightly open, while a rounder shape gi...

Read this entry »


View JordsWoodShop's profile

Can Do Series #1: A Simple Wooden Box

12-24-2011 01:43 PM by JordsWoodShop | 7 comments »

In this can-do video project I show you the process I use for creating a simple wooden box with four corner grain match. Check Out http://www.JordsWoodShop.com for more woodwork related goodness Related Links:Steve Ramsey's Candle Holder

Read this entry »


View poroskywood's profile

Drunken Cutting Boards #1: Drunken Alice in Wonderland Cutting Board

09-10-2009 03:22 AM by poroskywood | 41 comments »

Hey everybody, after a few personal messages here is my version of a how to on a Drunken Checker Board. I of coarse bow to the Chairman of the Board and pay tribute with beer. This is a Off-Checker pattern I call “Drunken Alice in Wonderland” The “serendipitous” nature of this piece is appealing in a far out sort of way. Here Goes… So first I prepare the Material. I am using Hard Maple and Walnut both are surfaced flat and cut 1” x 9” x 14&...

Read this entry »


View dakremer's profile

How-To #2: Bucket Chair

07-07-2011 04:29 AM by dakremer | 20 comments »

Hey Guys. This is something I thought of today (on my day off) and built within a couple of hours. I didnt use any plans….just an idea in my head. I am going fishing tomorrow and needed somewhere to keep my fish and sit, so decided why not do both at once. I used all scrap pine wood – 1X4’s and 2X4’s (I ran out towards the end and had to finish up with OSB). It sits pretty comfortable, and the height is perfect! Its definitely not going to win any fine wood ...

Read this entry »


View rance's profile

Rance's References

09-21-2011 05:19 AM by rance | 0 comments »

This is an online collection of my own woodworking references(& links), both from LJ as well as elsewhere. Many times I want to give someone a link but I don’t seem to have it handy. I’m hoping I can refer back to this to find a particular link and pass it on when the need arises. Feel free to use this in any way you wish. As time goes on, it will be more useful. You might even find it helpful.     PROJECTS/TECHNIQUES: BOXES” Resawing and Grai...

Read this entry »


View Jim Jakosh's profile (online now)

Unorthodox Bandsaw Box #1: Box making steps

12-11-2011 09:42 PM by Jim Jakosh | 28 comments »

My wife asked me when I was going to make her a box to keep our business cards in when we travel. I had made a few boxes but never one upon request- especially from her. So I wanted this to be special. I went about making a bandsaw box in an unconventional way and I was having a problem with the hinge design. One night I had a dream of how to do it and wrote it down right away in the morning. Here are the steps I used to make the box using mainly the bandsaw and the scroll saw for one tough p...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase