LumberJocks

Cherry Bailey Hand Totes and Knobs #2: Johnny Five is ALIVE!

  • Advertise with us
Blog entry by newplane posted 1394 days ago 1085 reads 1 time favorited 12 comments Add to Favorites Watch
« Part 1: Cherry Bailey Hand Totes and Knobs Part 2 of Cherry Bailey Hand Totes and Knobs series no next part

Hello friends! No I didn’t make a self-aware robot. But I did complete my #5 Bailey restoration complete with new Tote and Knob. I refinished the base, polished the brass, and installed the new Hock blade. I will give it a test drive tomorrow. Have a blessed day friends.

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

-- Dont just dream it, get up and live it!



12 comments so far

View chrisstef's profile

chrisstef

10441 posts in 1611 days


#1 posted 1394 days ago

Lookin good! Im in the process of doing the exact same .. did you turn the knob and did you get a template for the tote?

-- "there aren’t many hand tools as awe-inspiring as the #8 jointer. I mean, it just reeks of cast iron heft and hubris" - Smitty

View newplane's profile

newplane

159 posts in 2683 days


#2 posted 1394 days ago

Chrisstef—I turned the knob myself I had to laminate wood to get the right size but I don’t mind the design. You can get the template from Lee Valley for free here http://www.leevalley.com/en/html/16j4010l.pdf

Look for the link button for the totes here http://www.leevalley.com/US/wood/page.aspx?p=56664&cat=1,46168,46175

-- Dont just dream it, get up and live it!

View poopiekat's profile

poopiekat

3563 posts in 2339 days


#3 posted 1394 days ago

Hey there… how did you get such a bright surface on the base? Looks almost like bead-blasting, but I would really like to know how you got such a nice, burnished finish on he cast iron…

-- Einstein: "The intuitive mind is a sacred gift, and the rational mind is a faithful servant. We have created a society that honors the servant and has forgotten the gift." I'm Poopiekat!!

View chrisstef's profile

chrisstef

10441 posts in 1611 days


#4 posted 1394 days ago

awesome thanks new plane …

-- "there aren’t many hand tools as awe-inspiring as the #8 jointer. I mean, it just reeks of cast iron heft and hubris" - Smitty

View newplane's profile

newplane

159 posts in 2683 days


#5 posted 1394 days ago

Poopiekat—I just used a long piece of sandpaper that was originally supposed to be used for a big edge sander. It is 320 grit laid down on my bench top for the sides and bottom. I am not to worried for true 90 degree sides to the bottom. I have a Veritas low-angle jack for using on a shooting board.

-- Dont just dream it, get up and live it!

View poopiekat's profile

poopiekat

3563 posts in 2339 days


#6 posted 1394 days ago

Great! Thanks, newplane! I just scored a Bedrock #607 from a classified…I like evaporust for the frog, cutter, etc, but I dislike the dull gray finish on the soles that the solvent leaves behind. Gonna try your method! Ty again…

-- Einstein: "The intuitive mind is a sacred gift, and the rational mind is a faithful servant. We have created a society that honors the servant and has forgotten the gift." I'm Poopiekat!!

View newplane's profile

newplane

159 posts in 2683 days


#7 posted 1394 days ago

Ya I would really like some evaporust for the frog and stuff but I cant get any over here while stationed in Germany. I will have to wait untill I get back. Untill then I will just do what I can. Great score on the #607

-- Dont just dream it, get up and live it!

View Div's profile

Div

1653 posts in 1545 days


#8 posted 1394 days ago

Nice job, newplane! Newplane has a new plane that is better than a new plane!

-- Div @ the bottom end of Africa. "A woodworker's sharpest tool should be his mind."

View Dennisgrosen's profile

Dennisgrosen

10850 posts in 1720 days


#9 posted 1394 days ago

newplane
yes you can get it
I can´t remember the rest of europe but when I was on there homepage and look for dealers
outside US. I did see one in Sweden (had hope for one in Denmark)
but as I say can´t remember the rest but I think there was one in England too
but go in and tjeck the website :-)

by the way that plane looks like brandnew from here great work well done

take care
Dennis

View MedicKen's profile

MedicKen

1599 posts in 2067 days


#10 posted 1394 days ago

“Great! Thanks, newplane! I just scored a Bedrock #607 from a classified…I like evaporust for the frog, cutter, etc, but I dislike the dull gray finish on the soles that the solvent leaves behind. Gonna try your method! Ty again…”

After the evaporust use a wire wheel on a bench grinder to clean the part a little more. The wire wheel will brighten the metal and also remove the black coating that will sometimes be present after soaking

-- My job is to give my kids things to discuss with their therapist....medic20447@gmail.com

View Beginningwoodworker's profile

Beginningwoodworker

13337 posts in 2278 days


#11 posted 1394 days ago

Nice looking knobs.

-- CJIII Future cabinetmaker

View newplane's profile

newplane

159 posts in 2683 days


#12 posted 1394 days ago

Thanks everyone! I cant wait to get the rest done. Dennisgrosen—I will look for the Evapo, thanks.
Div—You cracked me up!

-- Dont just dream it, get up and live it!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase