LumberJocks

need2boat's Forum Topics

  • Advertise with us
View need2boat's:homeworkshopprojects (22)blog (24)reviews (0)forum topics (16)buddies (23)favorites (13)activity logWatch
573 days ago

Wilton Universal Turret Paternmaker Vise - 5 replies

Hello everyone, Not sure which is the best place to post this as I guess a vise is a hand tool but it’s also often an accessory as well. I recently bought this rotating paternmakers vise as I needed something light duty in my apt to work on saws. The price was right and it seemed it would work for both my needs in a small space but sad...

888 days ago

Foley Belsaw retoother - 3 replies

Like most old things, you end up with a few extra in the process of learning. I’m looking to sell a complete rethoother, manual, ratchets bars and carriers. The standard set included the following 5 bars that will retooth on those points per inch. 13-7-48-4.59-510-5.511-6 This is everything you need to retooth a saw. It would be for l...

959 days ago

Saw Sharpening 101 with Matt Cianci @ Shady Lea School of Woodworking - 0 replies

I posted this to my Blog but figured others in the North East looking into winter classes might be interested. Matt the instructor said they would be adding dates in the next week or so for Feb thru the spring. Joe One of the skills I’ve been working on as time permits is saw sharpening. Like so many of use I buy used tools and enjoy bring...

1001 days ago

FS Delta Downdraft Sanding Table around PHILLY/CHERRY HILL - 0 replies

I’ve got a Delta Downdraft Sanding Table I just don’t need. It’s seen VERY little use. I just don’t do that much sanding that requires its use and my shop is just to small to store it. This would be for local pickup around South Jersey Cherry Hill/ Philly PA area. I would also consider trade for wood or other things. ...

1003 days ago

Hollow mortise chisel Clico vs Lee Valley Premium - 4 replies

Hello all, Looking for anyone who has used either of the Clico or Lee Valley Premium mortise chisels. There is quite a bit of difference in price between the two and I’m leaning towards the LV but figured I’d see if anyone has much to say on either. I know a lot of it has to do with properly sharping them and I plan to do that ...

1016 days ago

A.A. Woods & Sons spoke pointers and hollow auger - 3 replies

Lets keeping this simple. ;-) I’ve got one and looking to use it in the making of a saw bench for the legs. For the most part I get how it works just not clear on how to adjust the cutting blade on the Hollow auger. I did some googling but really didn’t find much on usage. If anyone has experience please share. thanks Joe...

1018 days ago

Lie-Nielsen Hand tool Event @ Hearne Hardwoods, PA - 0 replies

Should have posted this BEFORE the event but just wondering if any other members made it to the event at Hearne Hardwoods. This was my first time to Hearne Hardwoods and a LN event. I was impressed by the selection of wood at Hearne’s and the people. I went Saturday around 10AM and the place was PACKED. I didn’t get the chance to ...

1109 days ago

dealing with cupped wood - 9 replies

Over the weekend I bought about 400 bf cherry. This was stored inside a barn for better then 25 years. The price was less then a 1.00 a bf and I’d say better then 3/4 of it is usable to some degree. Most of it is cupped some worse then others. 90% of it is right at 4/4 or just under and around 5 feet long. Most boards are 10-12” w...

1161 days ago

VCT vrs wood flooring for concrete - 6 replies

I’m looking to finish off floor in my shop. Its a small space, self standing with a concrete floor. The building is insulated well and heated although I don’t heat it much when not in it. I keep it around 40 50 in the winter when I’m not in it. M- Thurs. These are some older shots from last year when I was still finishing the r...

1178 days ago

info on installing a Byrd Shelix cutterhead in 15" jet planer - 0 replies

I’m getting ready to install the Shelix Cutterhead and other then replacing the sealed bearings should I pre-order anything else. I know the directions call to remove a dust or oil seal on the gear box side. Also for tools I have 2 gear pullers I’ve used for odd car repairs. any other tools to get. If anyone is looking to buy. ...

1185 days ago

gear box oil for Jet JWP-15CS Planer - 4 replies

I got a new to me 9/10 year old jet 15” planer that I’m guessing has never had the gear oil changed. The previous owner really didn’t use it much and reading the manual it says to change the gear every year and it’s calling for 50w gear oil. I’ve looked quite a bit in my area but just can’t seem to find 50w...

1260 days ago

router insert for Powermatic pm2000 table saw - 7 replies

Hello everybody! You can check out my profile for some pictures of my shop but it’s small and I bought most of the tools used. In the process of buying the planer I also bought a shaper as a set. That said I’ve been using it a bit but really feel it’s overkill for me plus I really don’t have the space. I’m lo...

1260 days ago

router insert for Powermatic pm2000 table saw - 0 replies

Hello everybody! You can check out my profile for some pictures of my shop but it’s small and I bought most of the tools used. In the process of buying the planer I also bought a shaper as a set. That said I’ve been using it a bit but really feel it’s overkill for me plus I really don’t have the space. I’m lo...

1290 days ago

Filtered sound baffle for dust collector pressure - 8 replies

Hello I’m new to the list, This is one of my first posts so if I’m on the wrong list just point me the right direction. I converted an old 30’s style single car garage to a shop in the fall. Considering the small size I decided to put the dust collector, PSI cyclone in a lean to I added on the back. Fast forward and IR...

1290 days ago

Looking for a source of cabinet grade plywood in South Jersey (Burlington County) - 0 replies

I’m new to the list so if I’ve posted this in the wrong area. Just give me a heads up and it looks like I can move it thru the edit process. As the subject says I’m looking for a source for cabinet grade, A or AA plywood in the Burlington County (South Jersey) area. I’ve been using diamond m lumber which carries A but ...

1290 days ago

Rockler Pack Rack Clamp & Tool Storage System (NJ) - 3 replies

I got this as a gift and although it’s really great for holding clamps I just don’t have the space for it in my shop. It’s been put together but currently site in the shed as I don’t have the floor space. It come with the extra top rack and also an extra set of shelf hooks. I’d like to get 100.00 for it but open to ...


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase