layout on a board a 36 degree across a line to create two 18 degree angles make sure your board is longer than the leg of your star put a finish nail at the intersection note I laid out my board to lay all legs on to assemble- this is not necessary just preference lay your leg in place align with nail themiddle of your leg should line up with the line that intersecs your 36* angle nose and tail mark your angle back to nail carry to table saw and freehand
|This blog is written by mrsmith | 4 entries so far|
measure and mark 15” cut your angles !https://s3.amazonaws.com/lumberjocks.com/m...
make your cut this is what you get flip one over make a mark on each at 4” line up...
Howdy to all interested in building a star.I would like to start by explaining the jigs.I cut...