LumberJocks

mpwylie's Workshop

  • Advertise with us
Workshop by mpwylie posted 2297 days ago 1166 reads 0 times favorited 11 comments Add to Favorites Watch

View all workshops »

View mpwylie's profile

mpwylie

38 posts in 2571 days


click the pictures to enlarge them

mpwylie's Workshop mpwylie's Workshop mpwylie's Workshop
mpwylie's Workshop mpwylie's Workshop mpwylie's Workshop

click the marker to see the address

This is my workshop. It took 7 months to complete, and I am up and running now.

-- Paul Wylie, Rogers, AR


11 comments so far

View GaryK's profile

GaryK

10262 posts in 2591 days


#1 posted 2297 days ago

Man, it looks like you got quite a project going there!

-- Gary - Never pass up the opportunity to make a mistake look like you planned it that way - Tyler, TX

View Scott Bryan's profile

Scott Bryan

27251 posts in 2425 days


#2 posted 2297 days ago

Wow. That is a lot of digging. And i see that a shop elf has already discovered your shop too. They have a way of appearing when you least expect them. :)

It looks like you have plenty to keep yourself busy for the foreseeable future. I hope that you can finish it by the end of April and can get on to things that are more enjoyable.

-- Challenges are what make life interesting; overcoming them is what makes life meaningful- Joshua Marine

View ND2ELK's profile

ND2ELK

13495 posts in 2377 days


#3 posted 2297 days ago

Hi Paul

It sure looks like you had your work cut out for you. At least you have a big door which should help when it comes to pouring the floor. Is your shop already wired for the shop? My new shop looks like a piece of cake after seeing what you had to do. Thanks for posting and good luck on the new shop.

God Bless
tom

-- Mc Bridge Cabinets, Iowa

View mpwylie's profile

mpwylie

38 posts in 2571 days


#4 posted 2297 days ago

My brother in law is an electrictian and told me if I buy the materials he will install everything for a steak on the grill. I have a 50 amp supply that was used for the electric stove before we put in a gas one, and it is above where one of the shop walls will be so I just need to drill through the floor behind the stove and run the wire down to a breaker box. He said it will not be that hard.

-- Paul Wylie, Rogers, AR

View Grant Davis's profile

Grant Davis

615 posts in 2511 days


#5 posted 2295 days ago

I am sure when you started you thought you would never get to the end of this one. But it looks like you have made great progree so far and I for one am looking forward to seeing the finished project. That is going to be a nice use of wasted space.

-- Grant...."GO BUCKEYES"

View motthunter's profile

motthunter

2141 posts in 2402 days


#6 posted 2295 days ago

progressing nicely.. Good luck

-- making sawdust....

View Raymond Dersch's profile

Raymond Dersch

38 posts in 2269 days


#7 posted 2254 days ago

Looks like you’re getting there! I was thinking about putting my shop in the basement as well but we have forced air and I was worried about saw dust getting all over everything on the first floor. Looks like you’ll have a nice large area to work with. I also noticed it looks like your a few hours south of me (Overland Park, KS). We’re almost neighbors! Good luck with the shop!

-- A King, realizing his incompetence, can either delegate or abdicate his duties. A Father can do neither. -Marlene Dietrich

View Kipster's profile

Kipster

1076 posts in 2356 days


#8 posted 2251 days ago

Looks like a lot of work. Keep at it. Hope you upsate your pics as you progress.

Thanks for the post.

-- Kip Northern Illinois ( If you don't know where your goin any road will take you there) George Harrison

View Beginningwoodworker's profile

Beginningwoodworker

13337 posts in 2276 days


#9 posted 1820 days ago

Thats a great looking shop.

-- CJIII Future cabinetmaker

View C.Dale Williams's profile

C.Dale Williams

3 posts in 1764 days


#10 posted 1756 days ago

Paul:
I have a manual for the Central Machinery 14” Band Saw, and I would be happy to make you a copy and send it to you. Also I have found a source for some of the parts for the Model 725 Saw. Just e-mail me and I will forward to information to you.

Clifford Williams
Clfwillia@aol.com

-- C. Dale Williams

View a1Jim's profile

a1Jim

112001 posts in 2180 days


#11 posted 1756 days ago

Nice shop and good tools. If that’s a gas water heater with and open pilot I would be very concerned about an exposition with saw dust flying around.

-- http://artisticwoodstudio.com Custom furniture

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase