LumberJocks

mountainaxe's Blog

  • Advertise with us
This blog is written by mountainaxe | 21 entries so far

Latest Entry

Gil-Bilt 18" Band Saw build #9: Completion!

08-29-2016 02:01 PM by mountainaxe | 3 comments »

The last steps in this project didn’t take too much time. First, I attached the front top panel to the two hinges. Next, I attached a guide support made from two 1/2” plywood pieces to the rear upper wheel cover. This piece also has two hanger bolts to mate with holes in the front upper wheel cover. There are also two thumb nuts and bolts for adjusting the blade guide. The blade guide fits over these bolts and can slide up and down by loosening the nuts. I next screwed the metal blade guard to the support column. The last step was to make a baseboard; I used a 2×6 pine board and dressed it up before gluing and screwing in down. This project in now complete. With ...

Read this entry »

Older Entries

View all 21 entries »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com