The last steps in this project didn’t take too much time. First, I attached the front top panel to the two hinges. Next, I attached a guide support made from two 1/2” plywood pieces to the rear upper wheel cover. This piece also has...
|View mountainaxe's:||home||workshop||projects (10)||blog (21)||reviews (0)||forum topics (5)||buddies (0)||favorites (9)||activity log|
None so far
130 posts in 2050 days
Location: Castroville, TX
Latest Activity | view all »
Latest Projects | view all 10 »
Latest Blog Entries | view all 21 »
The plans call for a rather simple rip fence fabricated from hardwood. I decided to use some leftover 3/4” oak to make my fence. I laminated two pieces together and dado’d a channel in the top to accept stops, clamps, etc. The short...
The next step was to attach the assembled table to the frame. I first placed the blade on the wheels. Then I removed the front channel from the table and set it in position on the frame with hinges against the hinge support. I ensured the table...
Last night I used a jigsaw to fabricate the pieces that make up the top wheel cover and supports based on the full sized templates. I attached the tensioner to the back piece and then attached it to the support column with screws/bolts using two ...
The tilting table took more time and consideration than I’d expected. First, I decided to make the table by laminating two pieces of 1/2” plywood with sandwiched strips of flat-iron, ala “Mr. Sawdust.” This will ensure I ...