LumberJocks

Luberjosks ..........in the pipe five by five , S4S , cleared for landing............

  • Advertise with us
Blog entry by moment posted 82 days ago 1010 reads 0 times favorited 7 comments Add to Favorites Watch

! I have been trying to calculate the degree of cut on the negative and positive angles . With his method , the inside of the dome would have no gaps . When two triangle sections are joined , they will be flush where they
join as well as outside and inside face . I am wondering if the red , yellow and blue struts all have different angles .
I guess somewhere in the 5 to 7 degree range . Of course he is not going to go into to great detail about those
angles because bottom line …he is selling plans . I am going to buy a set of his plans just to satisfy my
curiosity. I would like to build a 3V ,all wood , hub less , glue and screw, flush on the inside. dome . That is a nice
mock up that he is demonstrating with , and check out that pencil …,,,,, . Bucket list for the Dome build .

!

The cognitive distortions of this site, seem to me. to be on the rise . Surrealism and Virtual Reality ,
How are they similar , what are their differences . When you click the power to ’ OFF’ , poof !
everything vanishes . magic . I think I’ll go visit renners for awhile , he’s in another ‘virtual’ nearby .
I’m in the pipe five by five , signing off ,.... take care .

!



7 comments so far

View vonhagen's profile

vonhagen

483 posts in 960 days


#1 posted 82 days ago

Houston we have a problem we can’t beam up scotty because he is in an angle warp 7 degrees 28 minutes 5 seconds north of pluto.

-- no matter what size job big or small do a job right or don't do it at all.

View Sodabowski's profile

Sodabowski

2001 posts in 1428 days


#2 posted 82 days ago

Is that a planet anyway?

-- Holy scrap Barkman!

View Porchfish's profile

Porchfish

570 posts in 1127 days


#3 posted 82 days ago

Just Like Me !

and thanks for the intro to Cee Lo Green (I’m a old man out inna woods doncha know) so thanks again to you

Just Like Me !

-- If it smells good, eat it ! The pig caught under the fence is the one doing all thesquealing

View Texcaster's profile

Texcaster

624 posts in 269 days


#4 posted 82 days ago

Always an interesting mix moment.

-- Bill....... I listen very closely to the timber and then impose my will.

View lanwater's profile

lanwater

3072 posts in 1529 days


#5 posted 81 days ago

geodesic dome looks easier. Make in PVC (not wood?) and no negative angle.
I must have been asleep during geometry.
http://www.instructables.com/id/How-to-build-a-PVC-geodesic-dome/step3/Mass-Production/

Love the music so much better than what was on the radio today. they are good for keeping awake while driving.

-- Abbas, Castro Valley, CA

View learnin2do's profile

learnin2do

866 posts in 1446 days


#6 posted 70 days ago

It looks like it involves a table saw. I wouldn’t mess with it. I bet your perfectionist self has figured it out already! If not, let go, and just mortise and tenon a big pile of crepe myrtle and glob it all together with lots of wood-dust filler.
~used2btrees

-- christine

View moment's profile (online now)

moment

2099 posts in 1276 days


#7 posted 69 days ago

Hi Christine , my , it’s been awhile . Thanks for dropping in . I don’t know about crepe myrtle ,
but there is a boat load of mesquite growing out back. You could probably make those into something better
than me , Bahaaaaaa, !

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase