Curved doors.

  • Advertise with us
Blog entry by mickeycologne posted 02-16-2010 09:24 AM 713 reads 0 times favorited 2 comments Add to Favorites Watch

I’m just about to start a new project which has some curved shaker style doors involved, does any one know of a book or some techniques that i can obtain.
I’m thinking about having some cutters made for the door stiles and going down that route but i would like to study it somewhere first.
Is there anyone out there who has some experience of this type of work who can help me, this would be grately appreciated.
Many thanks
mickey cologne.

2 comments so far

View Moron's profile


5032 posts in 3313 days

#1 posted 02-16-2010 02:47 PM

there are many options and after perusing your web site I might suggest cheating

use multiple layers of “curve ply” applied to a mold/vacumn bag then apply veneer and 1/4” strips to mimic shaker

glue up thin layers of AD wood. re-cut to size, panel can be a mitered glue up, hand planed to fit

“curve ply” panel only

for cutting mortise and tenons….............I make a jig to fit curves, then shape/route/machine accordingly.

-- "Good artists borrow, great artists steal”…..Picasso

View Les Hastings's profile

Les Hastings

1300 posts in 3192 days

#2 posted 02-17-2010 12:49 AM

I did a blog on curved doors here on LJ’s, you can check it out if like. It might be of some help to you. If you have any questions just send me message on here.

-- Les, Wichita, Ks. (I'd rather be covered in saw dust!)

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics