Bookcase with Sliding Doors #12: Time to make a router table
Had to take a timeout to make this router table extension. It’s a torsion box design with router lift and fence.

| This blog is written by mdoan | 12 entries so far |
Had to take a timeout to make this router table extension. It’s a torsion box design with router lift and fence.
Three drawers made. Dovetails cut for the face and back using the porter cable dovetail jig. I ha...
It took me a weekend to make the leg stock. I mortised the legs and cut integral tenons for the r...
I removed the top and middle panels to cut grooves for the door slide hardware. The grooves are 7...
Here are the two sliding door frames with dominos cut in and assembled for the dry fit. I’v...
I used domino loose tenon joinery to form the face frame. This is the dry fit to check that all i...
The top pieces have been chosen and in the clamps for glue-up as we speak. The domino tenons help...
Here are the pieces i milled up for the top. I tried to go light on the jointer/planar because i ...
Here’s all the stock milled s4s, marked, and semi-stickered ready for ripping and cutting t...
I marked layout lines for the dadoes. The plans suggested cutting the dadoes for the sides and mi...
It’s hard visuallizing which grain pattern will look good for which part of the project. I ...
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
| Latest Projects | Latest Blog Entries | Latest Forum Topics
|
Latest Projects | Latest Blog Entries | Latest Forum Topics
|