LumberJocks

mc79's Forum Topics

  • Advertise with us
View mc79's:homeworkshopprojects (0)blog (0)reviews (0)forum topics (7)buddies (0)favorites (0)activity logWatch
366 days ago

Fuji HVLP Gravity Feed vs Bottom Feed - 3 replies

Hi All, I’m looking to upgrade my HVLP setup to a Fuji (haven’t decided on MiniMite 3/4 or Q3/4 Gold) My question is in regards to the Gravity Feed (cup on top) or Bottom Feed options available with each gun. Can someone explain the pros and cons of each option so that I can make the correct decision the first time? Thanks!

373 days ago

HVLP Gun and Compressor Help - 9 replies

I have a Vaper spray gun rated at 7.0-9.0 SCFM power consumption and 15-45psi air levels. (http://www.amazon.com/Vaper-19114-1-4-Millimeter-Gravity-Spray/dp/B0009IQ2EQ) I have Porter Cable 25 gallon compressor which pushes 7.7scfm at 40 psi and 5.4scfm at 90psi. (http://www.aircompressorsforsale.net/porter-cable-c6110-air-compressor) So do...

422 days ago

Unisaw Arbor and Blade Alignment Tolerances - 4 replies

Can you guys please tell me if these readings are acceptable for a “new old stock” 5hp X5 Unisaw that was still unopened in the box and crate when I bought it. I put descriptions of the arbor tests to make sure I have named them correctly. If not, what would be the cause and fix? Arbor Shaft Runout (at smooth part of shaft in be...

477 days ago

Delta Unisaw Operating Noise - 24 replies

So I just upgraded from a Ridgid to a new Delta 36-L51x – 5hp Table Saw. I just finished set up (except for the fence/rails) and decided to power it up for a test. When I hit Start, there is a loud clunking noise when first starting and then after that is the normal noise with vibrations/rattling coming in and out. So it will “vib...

585 days ago

normal jointer noise on Grizzly G0490? - 21 replies

So I just finished assembling the G0490 and according to the manual, I performed my test run and was supposed to listen for unusual vibration and noise coming from the machine. Well there is some slight vibration and noise but I think that is to be expected. As a new woodworker, this is my first jointer and I have no idea what would be conside...

639 days ago

Aligning Table Saw - First Attempt - Need Help! - 2 replies

I recently purchased a Ridgid R4512 table saw and have used it several times now. After getting burn marks on my wood (Soft Maple) from ripping and trying different blades with no success, I finally broke down and bought a digital dial indicator to check the setup of my table saw (alignment, etc..) I have taken measurements with both a Freud 2...

696 days ago

Router Bits and Stain Questions for Cabinet Making - 1 reply

Hello Everyone, I am going to attempt making my own cabinets and doors in the near future and am trying to obtain the gear I will need. I am pretty new to wood working but am almost finished with my workbench and ready to start some new projects. I obtained some sample cabinet doors and am interested in replicating these designs and am wonder...


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase