LumberJocks
DAILY DEALS Precision Taper Jig  |  Makita Makita Recon LCT203W 10.8 Volt Lithium Ion Impact Driver 2 Pc Kit

Napaman's Favorites

View WayneC's profile

Handplane Reference #1: Overview

976 days ago by WayneC | 20 comments »

This is a personal blog where I plan to include reference material related to handplanes. This is for me to capture information in this area and allow for people to comment if they wish. I am thinking of capturing the following topics: Handplane Books Handplane related videos Handplane related web sites Sharpening References Plane Restoration References Handplane Construction References Block Plane Recommendations Bench Plane Recommendations Shooting plane recommendat...

Read this entry »


View DAN 's profile

TILE WAITING FOR A FRAME #4: walnut oak frame alcohol dye and oil stained

58 days ago by DAN | 16 comments »

really jazzed up oil stain. dry in about an hour ...couple hours later …...

Read this entry »


View Todd A. Clippinger's profile

Back to Work on My 2 Year Project...

61 days ago by Todd A. Clippinger | 16 comments »

A Great Breakfast Rita and I had a great breakfast and visit with Dave Mitchell and his wife. They are passing through Billings and stayed at the campgrounds down the street since they are pulling their little camp trailer. We had a nice visit last night. I gave him the shop tour and showed the few pieces that we have been able to keep over the years. Now they have left it is time to get back on this little project for Rita. A Recap (Short Version) I started making this project...

Read this entry »


View degoose's profile

150 [Cutting] Boards by the end of September. #14: Day ??

70 days ago by degoose | 25 comments »

Lost track of the days and now only a few weeks before I have to pack and ship… does not look good, Every time I make a new design I sell some of them and with every thing else going on,, oh well still two weeks.,KEY =NGR new guinea rosewoodTB tasmanian blackwoodPH purple heartSA silver ashEWC european wild cherryFW french walnutThis weeks designs seem to be a winner as far as Xmas orders go,NGR with SA and TB/SA borderSame but biggerThis one is not really part of the 150 but I put it ...

Read this entry »


View dewoodwork's profile

Beautiful end grain cutting boards free project plan

733 days ago by dewoodwork | 37 comments »

Construct these beautiful end grain Cutting boards Hello fellow woodworkers,In the spirit of sharing woodworking knowledge I am writing this tutorial for anyone interested in constructing these beautiful end grain cutting boards. Take a look at the photos of the four styles I have made, or create your own pattern’s and follow the steps I have outlined in this tutorial. Questions and comments are welcome, enjoy. For thi...

Read this entry »


View degoose's profile

How to make just one more board?

211 days ago by degoose | 28 comments »

To start I make a full size drawing of the board to see how it will look.Make an endgrain blank in dark timberMake an endgrain blank in light timberGlue and clamp.Plane or sand flat and level.Join both blanks with double sided tape and mark out the curves and cut on the banksawDetach from tape and alternate light and dark.. insert a string of PH and SA glue and clamp.Plane or sand flat and level and repeat the marking cutting , alternating the cut parts,stringing and glueing and clamping.As y...

Read this entry »


View degoose's profile

Going wild at the chess board!!

215 days ago by degoose | 18 comments »

Welcome.Where do I start, at the beginning I suppose, I was born at an …..sorry not that far back!Ok let do this. [ I will be using imperial measurements throughout this blog..mainly ‘cause all wood working should be in imperial not metric! IMHO anyway] To start :Select the timber you will be making this here crazy board out of. For me this was Silver Ash and Tassie Blackwood as they contrast and compliment each other. I also decide to usesome purple heart as an accent. No...

Read this entry »


View Gary's profile

Celtic Knot Pens #1: One way to do it

813 days ago by Gary | 16 comments »

This was requested from multiple sites, so I did one for everybody. Here’s some photos of my process;I only had enough time to do a two-ring knot, but it’sall the same to make a four-ring knot accurately if you follow these steps. This shows the miter sled, the length of contrasting wood for the slices, and the bloodwood blank I’m going to use. I’ve already squared the blank so that all four sides are the same size.I randomly pick a side and mark it 1.Side 2 i...

Read this entry »


View Obi's profile

Uses for sawdust #1: I just got a thing from the tool crib on the uses for sawdust

541 days ago by Obi | 42 comments »

Click the link below and save the heating costs on your shop in winter. how to build and use a sawdust stove

Read this entry »


View Karson's profile

New Deck #1: Starting the new deck.

586 days ago by Karson | 19 comments »

Well I was working on building the deck and I kept saying. Take some pictures. But, it didn’t get done. These pictures are from before putting on the deck surface. The deck is placed just outside a small deck that goes between the screened porch and the Solarium. We have a spa in the Solarium room. The deck is basically 16’ X 16’. It’s 14 feet to the beginning of the curved edge. One end is tapered to match the sidewalk that goes around the house. I’...

Read this entry »


1 2
14 entries


  • View all advertisers
  • Advertise with us

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase