| This blog is written by martin007 | 9 entries so far |
-
bedroom furniture set #1: choosing the wood, an oak/maple contrast?
Hi all I am in the process of designing and choosing the wood for our new bedroom furniture se...
-
Holtzapffel workbench project #7: building the twin screw vise
Hi all Well, I couldn’t afford the 350$ + for the wooden screws, and I didn’t like...
-
Holtzapffel workbench project #6: bench completed
Hi all I have completed the bench, I still don’t know if I will install the veritas twin...
-
Holtzapffel workbench project #5: base joinery
Hi all Before I made the base joinery, I planned the top and it’s end grain the circu...
-
Holtzapffel workbench project #4: question about the mortise and tenon joinery
Hi I am getting ready to make the joinery for the legs and stretchers. I wonder if I should bu...
-
Holtzapffel workbench project #3: top assembled- now resuming work on the base
Hi All, there is nothing like a rainy day to get things done in the shop :o) Top is now ready ...
-
Holtzapffel workbench project #2: top and legs
I finally decided to build the Holtzapffel workbench. I have all legs and top parts milled, le...
-
Holtzapffel workbench project #1: making a top will boards face up?
Hi All My initial idea was to build a standard 2- 1/2 inch thick laminated top from 8/4 maple ...
-
furniture making with red pine?
Hi all 3 to 4 red pines of 10” in diameter are going to be put down near my cottage and ...
By subscribing to the RSS feed you will be notified when new entries are posted on this blog.
