|View mariva57's:||home||workshop||projects (42)||blog (0)||reviews (0)||forum topics (4)||buddies (15)||favorites (364)||activity log|
|08-21-2013 07:26 PM||
Makita bandsaw - 2 replies
I bought a band saw Makita LB 1200 F, I noticedthat the plastic insert is not at the level of the work plan in cast iron, but is below about 4-5/10 of mm, this is normaldifference? All that I have a problem when I have to cut some small pieces, so I use a tablet of 10 mm MDFto the plan.
|04-07-2013 03:12 PM||
sharpening chisels - 11 replies
I bought the Sharp 3000. I would like to sharpen this set ofchisels short of the Crown, which have a width respectively of 6-12-19-25 mm.I tried to measure the angle of cut with the digital goniometer, and I found that from 6 to 12mm measured at an angle of 31.2 ° while the 19-25mm and measured 28.5 °.I would like to know from you what angle I h...
|01-23-2013 08:56 PM||
polyethylene - 9 replies
Today I bought a piece of polyethylene (such as cutting boards) with the size of 40×80 cm, thickness 1 cm, I would like to kindly know if I can cut it with the table saw.Naturalmente with the same knife that I use forcut the wood. Thanks to those who will give me an answer.
|01-06-2013 10:19 PM||
Restoration of wooden planes - 24 replies
My father in law I won four planes of wood, arewere built in the early 1920’s. I would like to restore them but my skills are few, the first thing I have to treat the wood with a product antitarlo.Vorrei have a few tips:-what product should I use to cover the holes of the worms,-the type of finish-and other advice to complete the job.Thank...