LumberJocks

majuvla's Workshop

  • Advertise with us
Workshop by majuvla posted 03-04-2016 02:04 PM 1834 reads 0 times favorited 16 comments Add to Favorites Watch

View all workshops »

View majuvla's profile

majuvla

12082 posts in 2834 days


click the pictures to enlarge them

majuvla's Workshop majuvla's Workshop majuvla's Workshop
majuvla's Workshop majuvla's Workshop majuvla's Workshop

click the marker to see the address

My workshop is my car garage and when not working the car must fit in. That’s why all maschines and powertools are on wheels.
From left to right, there is small lumber storage (the rest of lumber stack is in house basement), than home made jointer. In left corner there is sanding stations place – sanding mop, grinder, disc sander, belt sander and oscillating spindle sander.
Front middle : Metabo site-saw (with it’s own vacuum cleaner bellow) and mitersaw, than Einhell drillpress (Einhell scrollsaw bellow). Behind mitersaw there is home made cyclon vacuum cleaner set. In right corner there is home made router table (photo from the back), Elektromaschinen bandsaw and in the corner there is the box whit various tablesaw (and other) jigs.
On the right side of workshop I have workbench (just regular table). Bellow there is Einhell air compressor and Metabo thicknesser on top-flip trolly.
On walls there are shelfs with lot of electric powertools, other hand tools, accesories and equipment.
When working I must pull out some maschines (tablesaw, jointer, router table or thicknesser), while all other are accessible on spot.

-- Ivan, Croatia, Wooddicted


16 comments so far

View a1Jim's profile

a1Jim

117063 posts in 3544 days


#1 posted 03-04-2016 02:35 PM

Super looking shop with lots of great tools.

-- https://www.artisticwoodstudio.com/videos wood crafting & woodworking classes

View HeartlandTX's profile

HeartlandTX

33 posts in 3121 days


#2 posted 03-04-2016 03:14 PM

You make good use of a small space. Very clean. Did you clean it for the photos?

-- Enjoying life and making a difference.

View pottz's profile

pottz

2597 posts in 951 days


#3 posted 03-04-2016 03:25 PM

great shop your like me i have everything on wheels so at the end of the day it all rolls back in its spot like a puzzle so my truck can park.its not about the space but what comes out of it.its very cool seeing how wood workers in different parts of the world work and the kinds of tools used,thanks for sharing your space.

-- sawdust the bigger the pile the bigger my smile-larry,so cal.

View JoeinGa's profile

JoeinGa

7735 posts in 1974 days


#4 posted 03-04-2016 03:34 PM

I agree on your good use of the space. Looks like you might need a shoehorn to get the car in there though! :-)

-- Perform A Random Act Of Kindness Today ... Pay It Forward

View splintergroup's profile

splintergroup

1980 posts in 1189 days


#5 posted 03-04-2016 05:03 PM

Thanks for the view into your world!

You get a lot of quality work done in a small space, I can see why you enjoy making your own tools (and saving money). You can customize how they fit into your workspace.

View ZAGREB's profile

ZAGREB

798 posts in 1616 days


#6 posted 03-04-2016 07:25 PM

stari moj,još malo alata,strojčina i moraš debelo smršavit…i kolko vidim mijenjat auto za fičeka…
samo me zanima…kolko kotača imaš?hehehe…šala mala…nadam se da se skoro vidimo…pozdrav i pazi prste

-- bambi

View johnhutchinson's profile

johnhutchinson

1243 posts in 1596 days


#7 posted 03-04-2016 10:41 PM

Thanks for the tour, Ivan! It’s nice to know where you’re located.

Your homemade tools are first-class! Are you making them because you want to, or because manufactured versions are not available?

I love your wood scrap boxes. Small, to smaller, to smaller …
You’re like me. I keep everything bigger than a toothpick. :-)

-- John - Central Ohio - "too much is never enough"

View Roger's profile

Roger

20923 posts in 2771 days


#8 posted 03-09-2016 12:30 PM

Thnx for the tour of your nice shop.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com

View moke's profile

moke

1154 posts in 2743 days


#9 posted 03-09-2016 07:45 PM

Very nice shop, it looks like you have made some nice cabinets for your tools. Your shop resembles a lot of ours around here, only with different names on the tools! Thanks for showing….
Mike

-- Mike

View doubleDD's profile

doubleDD

7321 posts in 2010 days


#10 posted 03-13-2016 01:47 PM

Looks like you are utilizing every bit of space possible. Nice shop Ivan.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View CFrye's profile

CFrye

10131 posts in 1806 days


#11 posted 03-15-2016 10:42 AM

Very organized workshop, Ivan! I think you need more hand planes, though. Kidding! Thanks for sharing!

-- God bless, Candy

View Dave Rutan's profile

Dave Rutan

1701 posts in 2155 days


#12 posted 03-15-2016 11:59 AM

Nice shop! I’ve often wished mine was in a garage so that I could expand into the driveway. My basement is warmer in winter though.

-- Ni faru ion el ligno!

View stefang's profile

stefang

15881 posts in 3301 days


#13 posted 03-31-2016 02:06 PM

Very well organized Ivan, and with lots of great shop built tools/accessories. Not easy to do this in garage which is still being used for the car.

-- Mike, an American living in Norway.

View helluvawreck's profile

helluvawreck

30765 posts in 2833 days


#14 posted 03-31-2016 06:23 PM

Ivan, you have a very nice shop. It looks very interesting.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View LittleBlackDuck's profile

LittleBlackDuck

1678 posts in 787 days


#15 posted 06-05-2016 05:41 AM

Ivan, Great use of your space and love the timber stands. You have my understanding (and sympathy) in the need to move machinery around to do work let alone permit the intrusion of that 4 wheeled beast. I let mine rot in the rain.
I had a very small workshop in my previous residence and my current shop is about 3 times bigger but still too small (and I haven’t got that many more tools).

-- If your first cut is too short... Take the second cut from the longer end... LBD

showing 1 through 15 of 16 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com