LumberJocks

Rocking Horse #7: The details take more time.

  • Advertise with us
Blog entry by MC posted 07-04-2012 03:14 PM 1198 reads 0 times favorited 1 comment Add to Favorites Watch
« Part 6: Dry assembly Part 7 of Rocking Horse series Part 8: Final Assembly in Progress »

Did not get as much done as I had planned this past weekend. I work in an open garage and the 105 degree F temperatures slowed my progress.
I did pick up more walnut and made another saddle for the horse. I also rounded over all the edges with a router and cut inlays for the harness I made out of walnut scraps; had plenty. Shaping the inlay took some time and involved a block plane, rasp, chisel and finally a handy Dremel.
Down to the final steps. I will be sanding and assembling over the next week. I will have to wait for the weather to cool down some before I can apply the finish.



1 comment so far

View GrandpaLen's profile

GrandpaLen

1503 posts in 923 days


#1 posted 07-04-2012 04:50 PM

Great looking design, the shaping is coming along well also.

Shaping is my favorite part of building them as it gives each a personality.

Work Safely and have Fun. – Grandpa Len

-- Mother Nature should be proud of what you've done with her tree. - Len ...just north of a stone's throw from the oHIo, river that is, in So. Indiana.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase