LumberJocks

Rocking Horse

  • Advertise with us
This blog is written by MC | 13 entries so far

Latest Entry

Federal Bath Vanity #2: Starting with the doors

11-22-2016 12:50 AM by MC | 3 comments »

The doors are a challenge. I needed to build two forms, one for the center and one for the two outside doors. The same forms will be used for the panels in the top. For the center form I had to account for the thickness of the door as the form is on the inside of the door. The form for the outside doors was the opposite. I do not have a vacuum press but straps seemed to work just fine. The doors are laminated using six layers of 1/8” bendable plywood; hot hide glue was used. On the top and bottom of the doors rails of Mahogany were glued. On the sides Mahogany styles were added with tounge and groove. The rails were shaped on a router table with a pattern bit. The styl...

Read this entry »

Older Entries

View all 13 entries »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com