Table saw sled

  • Advertise with us
Blog series by mIps updated 09-16-2013 08:49 PM 2 parts 2407 reads 3 comments total

Part 1: Trial run

05-03-2013 03:27 AM by mIps | 1 comment »

Sometimes finding out what doesn’t work is the best way to find out what will…So, I had this great idea about combining a panel sled, miter sled and cut-off sled into one, grand unified sled. I had my plan and executed it to the best of my abilities. Sadly, it didn’t work. Even more sadly, I don’t think it COULD have worked. Oh well.That failure led to a re-vamp of the cut-off sled to a more traditional design, omitting the panel cutting idea completely. I still want t...

Read this entry »

Part 2: almost done

09-16-2013 08:49 PM by mIps | 2 comments »

The new sled is almost done and I am much happier with it. As you can see it’s a basic sled. No Schmancy bits but it runs better in the table, has a DIY T-Track and a blade box so, it’s a upgrade. The back fence is 2 pieces of 1×6 laminated together with glue and screws. I cut a slot in this 5/8” wide and 1/4” deep then laminated a piece of cheap 14” ply over it and cut a 1/4” slot in that to make the t-track. It’s a bit crooked at one ...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics