Rolling drawer cabinets

  • Advertise with us
Blog series by mIps updated 07-31-2013 04:22 PM 3 parts 3652 reads 5 comments total

Part 1: Frustrations

10-11-2012 06:48 PM by mIps | 5 comments »

So I want to build some rolling drawer cabinets to go under my workbench. I want them to be fairly easy to move so I can double-use them as worktables and, hopefully, in feed and out feed for my tablesaw. I know, right?I have the carcasses built and I am reasonably happy with them. My problem is the drawers. My first thought was to just butt-join them together but I wanted something better than that, so I Decided to try to make finger joints. This was a miserable failure. My router (see other...

Read this entry »

Part 2: Starting over

07-23-2013 04:11 AM by mIps | 0 comments »

It’s been a while since I’ve worked on the rolling cabinets. I had other projects that I wanted to work on and, quite frankly, the cabinets were just not working the way I wanted. So, I’m starting over with a new design that will hopefully work better.So the plan now is to rabbet the edges of the op and bottom, inset the sides and then put in a full inset back. This should give a lot more stability and strength to the cabinet. I also have a plot for a adjustable height top t...

Read this entry »

Part 3: In which progress is made

07-31-2013 04:22 PM by mIps | 0 comments »

I’ve been working on the drawer cabinets off and on for a couple days and have made some progress. Still cant find my camera though so, at least for now, no pics. The plan was thus: Each cabinet would be roughly 20” wide x 16” deep x 24” high and have a second, adjustable-height top that would be roughly 23” wide x 20” deep. Each top would have a 3 1/2” wide slat on each side with a 1/4” slot down the center for height adjustment. each c...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics