Bedroom desk #2: It's got legs...

  • Advertise with us
Blog entry by mIps posted 05-30-2014 07:52 PM 1290 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 1: Staining Part 2 of Bedroom desk series Part 3: Assembly »

I finally decided to taper the legs for the desk.

A picture of my tapering jig

One of the legs

All four, done. you can see the color differences in the legs made from two different woods. I’m not too worried about it, though, as I plan on putting the 2 pine legs on the back of the desk where they’ll be seen less.

Gluing the front block onto the middle assembly. I guess the plywood that I used was actually 5/8 or 11/16 as its not quite as wide as the bottom rail or the front block. I’ll deal with this later.

-- Be honest, honorable, kind, work hard, and generally be awesome.

0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics