LumberJocks

mIps's Blog

  • Advertise with us
This blog is written by mIps | 35 entries so far

Latest Entry

Jointer #2: De-rusting

07-10-2016 10:22 PM by mIps | 2 comments »

Well, I finally had a chance to start tackling the jointer cleanup. luckily the in/out-feed tables were fairly clean and had only light rust. I took two passes with rust cleaner on both and then a light sand with WD-40 as “lubricant”. They cleaned right up and look good. The cutter head is a different story. It’s more rusted and harder to clean. I did the best I could with a wire brush and a green scrub pad. I’ll know later if I helped any in getting the old blades out. Sadly, I learned that the infeed table has a slight dish to it and, without re-grinding or LOTS of sanding, it’s as good as it’s going to get. To be honest, I don;t even know if its wo...

Read this entry »

Older Entries

View all 35 entries »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com