A new begining #2: I have too much stuff
I got sick of tripping over my 30+ clamps. Since none of my tools were set up yet, I need to make a clamp rack using a circular saw and cordless drill. This is far from elegant, but does the trick. Also this space is right near the second garage door entrance, so it was a good use of useless space I also decided on a location for the drill press, lathe, spindle sander and sharpening system The lathe and DP are plugged into the wall outlet. I’m going to run a short 12awg extension cord from the ceiling outlet to a heavy duty power strip for the sander and the grinder I also built a 3’ x 6’ outfeed/assembly table out of 2×4’s plywood, and te...
