louie's Blog

  • Advertise with us
This blog is written by louie | 1 entry so far

Latest Entry

no end vice

03-31-2009 09:35 PM by louie | 4 comments »

Just wanted to let you in on a jig, I just made for my self. I have a self made bench, but no end vice for clamping, on it for gluing or painting work. Any way I use round dogs and then clamp the work at the end. I was feeling sorry for my self for not having a vice, so I figured I would do the next best thing. Using my drilled press, I took one of the dogs on its flat side, using a 5/8 bit then tapped it. I got a 5/8 bolt about 6” long screwed it in and put a jig kit knob on the end and now I had a end vice., It works very well and not as big as a end vice. Louis

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics