LumberJocks

Sculpted Dining Table

  • Advertise with us
Blog entry by longgone posted 11-28-2011 04:51 AM 5681 reads 1 time favorited 4 comments Add to Favorites Watch

The table will be primarily Zebrawood with Padauk for the sculpted rails. The top is going to be Zebrawood and will be approximately 38×80”.
I laminated 4 pieces of Zebrawood for each leg so I could start with 3×3x29 blanks. I added an aditional piece of Padauk at the base of each leg for a little extra color accent.
I then used a 3/4” dovetail bit on each leg to accept the rails and then cut the curves on the bandsaw.



4 comments so far

View DocSavage45's profile

DocSavage45

7696 posts in 2302 days


#1 posted 11-28-2011 08:17 AM

Let me be the first to say ” Holy s_ Batman!”

-- Cau Haus Designs, Thomas J. Tieffenbacher

View gfadvm's profile

gfadvm

14940 posts in 2150 days


#2 posted 11-29-2011 04:27 AM

Another ‘Greg’ masterpiece in the making. I can’t wait to see the finished project. Please keep us posted.

-- " I'll try to be nicer, if you'll try to be smarter" gfadvm

View sras's profile

sras

4391 posts in 2589 days


#3 posted 11-29-2011 04:36 AM

Already looking forward to an update! Should be an awesome table.

-- Steve - Impatience is Expensive

View William0076's profile

William0076

4 posts in 1759 days


#4 posted 02-08-2012 06:27 PM

Dovetail joints? Hmm…..

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com