LumberJocks Woodworking Forum banner

Wine Bottle holder

2K views 1 reply 2 participants last post by  mojapitt 
#1 ·
Wine Bottle holder

As I said in my post I seen these holders and thought they were cool and would sell so I made one tried it and it worked but the first hole was alittle big so I made it smaller and it worked better. That night I thought of the wine glass holding the bottle so the next day I free handed a glass on the wood and cut it. It worked great so I made more. I started with a 3/4' or 1" piece of wood then I made them between 10" and 9" tall By 3 to 3 1/2" wide the bottom angle is 36 degrees and the hold is a 1 1/2". The hole has no angle to it and is 1 3/4" from the top centered. I then use the router to do a roundover on the out side edge and of the pattern and the hole. Sanded it and finished it with Watco. Once you know what you want to do they take about 15 to 20 minutes to build three at a time start to finish. To see the finished product just go to my projects. Have fun
Dennis
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top