Episode 81 Entertainment Center Part 2

  • Advertise with us
Blog entry by kosta posted 10-06-2010 03:03 AM 2031 reads 0 times favorited 3 comments Add to Favorites Watch

Episode 81 Entertainment Center Part 2 from kostas workshop on Vimeo.

In this episode I flatten the panels I glued up. After that I cut some rabbets on the top and bottom panels at the router table. After I dry fitted the 4 panels I have already glued up I got some measurements for the inside of the entertainment center.

3 comments so far

View Rob Lopez's profile

Rob Lopez

9 posts in 3425 days

#1 posted 10-06-2010 02:01 PM


Great video like always. It’s cool that someone your age has a passion for woodworking. I wish i would have pursued this more out of high school.

Anyways if I may…

Alway measure for inside panels from the supported end, not the middle. There is too much play in the unsupported area (middle) and your panels will not always come out the way you need them to.

Good Luck with your project. I know it will look good.

-- Boards, Don't hit back! - Bruce Lee

View alfred222's profile


98 posts in 3201 days

#2 posted 10-07-2010 01:30 AM

Thanks Kosta allways interesting. Alf.

View kosta's profile


946 posts in 3590 days

#3 posted 10-07-2010 01:48 AM

Yea most schools have cut out shop class just because they dont have money anymore. They should really bring it back though. I see what your saying about measuring from the supported end.When I measured from the edge I got a different measurement then when I measured from the center. It was only about a 1/16 in off but that type of thing can really screw a project up.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics