LumberJocks

...

  • Advertise with us
Blog entry by knotscott posted 11-04-2012 12:01 PM 3604 reads 0 times favorited 4 comments Add to Favorites Watch

Doh! I managed a duplicate blog post! Here’s what you’re looking for – http://lumberjocks.com/knotscott/blog/34563

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....



4 comments so far

View Cosmicsniper's profile

Cosmicsniper

2201 posts in 2064 days


#1 posted 11-04-2012 03:14 PM

That’s a great tip, Scott. This also works for the Incra TSLS fence, quite easily in fact because those rails slide on T-track bolts. I’ve given myself an extra 4 or 5” this way on my stock 32” fence. I could give myself a lot more, but I have a right-tilter. Every now and then I have to cut from the left side…but when I do that I typically do not need all that much capacity.

I’ve often wondered why left-tilters don’t just start the rails close to the blade? Do that with a small capacity fence and you’ll have close to a full plywood width ripping for less cost. I guess you do need to keep some space between bolts so the rails don’t flex too much, but that’s the only thing I can think of. But I would add a cabinet and/or support legs to the right side if I moved the rails too much.

-- jay, www.allaboutastro.com

View knotscott's profile

knotscott

6143 posts in 2281 days


#2 posted 11-04-2012 03:29 PM

That’s good to know Jay….lots of Incra fans out there.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View Joe Lyddon's profile

Joe Lyddon

8202 posts in 2957 days


#3 posted 11-04-2012 03:38 PM

Very good ideas!

Thank you.

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: http://www.WoodworkStuff.net ... My Small Gallery: http://www.ncwoodworker.net/pp/showgallery.php?ppuser=1389&cat=500"

View Beginningwoodworker's profile

Beginningwoodworker

13347 posts in 2578 days


#4 posted 11-04-2012 11:45 PM

Great tip!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com