LumberJocks

kiefer's Blog

  • Advertise with us
This blog is written by kiefer | 31 entries so far

Latest Entry

Kiefers Little Tapper build

10-01-2014 02:38 PM by kiefer | 0 comments »

Here is the the build process of the little tapper that I use.I start by sourcing most pieces I need from the scrap bin and cutting them to size .Next I mark out the centre layer of the head and cut it into three pieces using my sled on the table saw .If you look back in my projects you will find the post of my sled which has a double bottom that allows me to tilt the blade and maintain a zero clearence to the blade by sliding the top layer against the blade at any tilt angle .Now you can see all the pieces and the order of how they fit together .Here is the glue up and almost all pieces that make up the mallet are glued together in one clamping .The open section has spacer blocks insert...

Read this entry »

Older Entries

View all 31 entries »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase