| This blog is written by kenn | 11 entries so far |
-
Roubo Bench - Becoming usable
I have made lots of progress and actually am using my new bench some, I’ve just needed to g...
-
Roubo Bench - Base Completed
It is time to assemble the base for this massive bench. I gathered some air dried oak that I had...
-
Roubo Bench - Getting the base ready
Well its time for me to get all of the mortise and tenons ready for the base. First I had a few ...
-
Roubo Bench - She's Got Legs
It’s time to get some legs on this baby. My son and I started my milling the mostly oak st...
-
Roubo Bench - sweating
Ok, here is the hard work and sweat that needs done – the underside of the top need to be r...
-
Roubo Bench - The beginning
I decided that I needed/wanted a new workbench and after some research, including Chris Schwartz&...
-
Dog Bowl #5: Fixing loose dovetails
Well I had a few dovetails that I wasn’t happy with. I took my dozuki saw and carefully op...
-
Dog Bowl #4: Pins done, glued up
Well I got the pins cut and chopped. I had to spend some time fitting the pins to the tails. I ...
-
Dog Bowl #3: Tails ready
I got a bit of time today to chop out the tails and feel they look good. Next up is to do the pi...
-
Dog Bowl #2: Annie's Bowl
I cut the tails this morning but chopping them out will have to wait for another day. Here is th...
-
Dog Bowl #1: Jersey's dog bowl
Here is the beginning of my current project. I got a new puppy Dec 1. We named her Jersey in ho...
By subscribing to the RSS feed you will be notified when new entries are posted on this blog.
