Kelly's Blog

  • Advertise with us
This blog is written by Kelly | 5 entries so far

Latest Entry

Grinder and Beltsander Setup Gauges

02-14-2018 06:59 AM by Kelly | 3 comments »

When you sharpen your own chisels and wood turning knives, you’ll find it necessary to set your grinder or sander support table to different angles for different tools. Of course, you’ll find it necessary to repeat the previously set angle, to avoid removing valuable steel from the tools, and to get consistent cuts. Setting up a tool rest of a grinder or belt sander to grind a specific angle presents a challenge because you can’t use triangle templates (see first photo), angle gauges like I use in the steps of this ible, or similar set up tools. You can use a bevel gauge. To do so, you’ll have to set it to the angle you need for the tool you’re sharpening. You can do t...

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics