Justin's Blog

  • Advertise with us
This blog is written by Justin | 4 entries so far

Latest Entry

Queen Size Storage Bed #3: Painted and installed

11-13-2017 09:51 PM by Justin | 0 comments »

After a lot of sanding, priming, and more light sanding, I applied 2 coats of Olympic One. Once that cured out I made up a quick little template to guide the hole drilling for the pulls. Each pull has 2 screws and there are six drawers, so I definitely didn’t want to measure all those holes out. I measured it out very carefully on a plywood scrap that would register inside the face frame on the drawer. Then I can just flip the template left to right for the two locations on each drawer. Had to paint in the dining room since the garage was down to about 30 degrees. Late fall has certainly arrived in New Hampshire. Not much left to say. It turned out pretty good in the end...

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics