LumberJocks

john81's Favorites

  • Advertise with us
View daltxguy's profile

Cutlist and Layout from Sketchup

07-03-2008 02:37 PM by daltxguy | 318 comments »

If you’re a fan of Sketchup for creating woodworking models, then the next obvious step is to use Sketchup to help you create cutlists and layouts. Sketchup plugin Cutlist 4.1 does just that. CutList 4.1 sketchup plugin helps you determine how much of each material you need to produce your design, taking into account nominal sized lumber with allowances for finishing to final size. Then it goes one further and lays out all of the pieces on boards or sheet good sizes of your choosing. Th...

Read this entry »


View bondogaposis's profile

Roubo #8: It's Done!

04-14-2013 09:49 PM by bondogaposis | 13 comments »

This is the grand finale. Here I’m doing the final leveling of the top. It was a ton of hand planing and sanding. It’s not perfect but not too bad either. I only sanded to 100 grit, I don’t want a slick surface. Now onto applying finish. I used a simple mixture of 1/3 MS, 1/3 BLO and 1/3 spar varnish. Next up is to apply suede to the vise chop and wagon vise and dogs. I used contact cement. That was the last step and here is the final product. ...

Read this entry »


View Grampa_Doodie's profile

Class On Kevin Rodel's Side Chair #1: Introduction

12-26-2012 05:34 PM by Grampa_Doodie | 6 comments »

This class will show you the steps that I took to build this really beautiful side chair designed by Mr. Kevin Rodel. Here’s a photo of just some of my chairs sitting around our kitchen table. I’ll be sharing several good things (and a few bad things) that evolved down in my shop while building ten of these gorgeous chairs. Hopefully you will walk away with a handful of tips that will make your chair building session a much more pleasant experience. I learned an unbelievabl...

Read this entry »


View StumpyNubs's profile

The Stumpy Nubs Workshop #14: Maybe the greatest way man has ever devised to cut box/finger joints...

03-11-2012 02:45 PM by StumpyNubs | 35 comments »

In the latest episode of Blue Collar Woodworking we make a micro-adjustable, multi-feature box joint machine that just might kill the dovetail forever. And then Stumpy tells the farmers where to stick it. This box joint machine has a lead screw advance and a template option, smooth, non binding sliding carriage, and a quick release so you don’t have to crank it all the way back. Plus, it will handle the biggest of jobs, and the best part is, you can build it for CHEAP. One feature...

Read this entry »


View Todd A. Clippinger's profile

Shop Skills #2: Card Scrapers the Video!

12-29-2008 03:43 AM by Todd A. Clippinger | 54 comments »

It’s Finally Here! I have completed my first feature woodworking video. This video shows how I sharpen my card scrapers. It is a simple process and I kept the instruction simple with some close-up video action. I hope this post goes smooth, it has taken me all day to figure out how to finish up the video and 3 attempts to get it online. So this is a pretty big moment. I can work on polished video later but I have to start somewhere. I hope that this video on sharpening ca...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase