| This blog is written by sIKE | 26 entries so far |
-
Norms Router Cabinet #6: Woohoo the Router Cabinet base is done
Well I got out late this afternoon and put a couple of hours into the base cabinet an got it comp...
-
Norms Router Cabinet #5: Drawers and Trays are done
Got out today and get the trays for the left hand side of the cabinet redone, I found a real cool...
-
Norms Router Cabinet #4: Bit Tray's and Cabinet Door are Done - well almost
Worked on this last weekend and got back on it today. When I worked on it Sunday getting the door...
-
Norms Router Cabinet #3: The Electrical Work
Got back in the shop this afternoon and after two trips to the orange box I get all of the electr...
-
Norms Router Cabinet #2: "My" Cabinet is done
This weekend I got the cabinet assembly completed (basically). Still have the drawer const...
-
Norms Router Cabinet #1: Starting on the Cabinet
I am very excited about this project as it is the last major one before I consider the build out ...
-
RAS Cabinet #6: Testing the Assembly
Finished up the Torsion box early this afternoon, after the glue dried I laid out the mounting ho...
-
RAS Cabinet #5: Torsion Box is started
I started the torsion box this weekend. This is my first one and it has been a learning experienc...
-
RAS Cabinet #4: The Case work is done
Started working on the case this weekend and got it done this evening. Here is the Sketchup drawi...
-
RAS Cabinet #3: Getting started with the case
As previously posted, I had worked out the details to my RAS cabinet using Sketchup. I started wo...
-
RAS Cabinet #2: The Cabinet Design and Sketchup
Well here is the drawing for the cabinet base for my RAS. The design for this has been challe...
-
RAS Cabinet #1: Sketchup - Torsion Box Design and Layout
I have been working on the design of the Cabinet of the RAS for sometime now. I finally got the S...
-
Miter Bench and Storage #8: Time to puts some drawers in!
I managed to finish milling the drawer fronts/sides/backs this past Sunday and started the assemb...
-
Miter Bench and Storage #7: The Good, the Bad, and the Ugly
Well, I have been slowly working on the this project over the last couple of weekends, but had to...
-
Miter Bench and Storage #6: Back to work, Top is done (well almost)
After taking a month long siesta from the shop I was happy to get back out and make some sawdust,...
-
Miter Bench and Storage #5: Delays - Will get back on it soon.
Sorry for the delays. Late March though all of May is very busy for me and have not gotten any sh...
-
Miter Bench and Storage #4: Miter Box and Drawers
Got back on the project this weekend. The goal was to get the Miter Box assemblies completed. Wit...
-
Miter Bench and Storage #3: The top is on and it is trimmed out (mostly)
I managed to get the top on during the week and got it mos of it trimmed out today. I need one mo...
-
Miter Bench and Storage #2: Dust Collection and Leveling
I have been working off and on this project since the last blog. I have had to spend most of the ...
-
Miter Bench and Storage #1: Getting started with the base
Finally got started on Norms Miter Bench and Storage. I had previously rough cut the base compone...
-
My Cabinet Maker's Mallet #3: The final glue up
Well didn’t get as much done as I had hoped. I did get the 1 1/2 inch threaded rods epoxied...
-
Switched DW746 to 220V
What a difference this makes! It took about twenty minutes to do and I am kicking myself for not ...
-
My Cabinet Maker's Mallet #2: The first two glue ups and finished shaping the handle
I made some good progress today working on the mallet. I got the first glue up done and the dado ...
-
Stanley #4 Type 9 or 10 - Plane Restoration #1: The cleanup
I have learned that projects in progress go in the blog and the completed project goes in project...
-
My Cabinet Maker's Mallet #1: Stock Prep
I have restarted working on my Cabinet as shown in an eairler project I have already made two of ...
-
Wixey Saw Fence Model WR700 #1: Problems - Sigh
Got one for my birthday yesterday, I really have been wanting one of these. I got out late this m...
By subscribing to the RSS feed you will be notified when new entries are posted on this blog.
Blog Series
- Miter Bench and Storage - 8 parts
- My Cabinet Maker's Mallet - 3 parts
- Norms Router Cabinet - 6 parts
- RAS Cabinet - 6 parts
- Stanley #4 Type 9 or 10 - Plane Restoration - 1 part
- Wixey Saw Fence Model WR700 - 1 part
Your Online Shop - Your Support Is Greatly Appreciated - Your Woodworking Showcase - 3 Ways To Help, Financially - Your Woodworking Community
